Quality Standards
An ISO 9001 : 2000 certified |
 |
|
Insulated Sheet - (Versatile high specification System)
Insulated Roof & Wall Cladding
Heating or cooling is one of the largest operating expenses in a building. That is why it is important that each building has good thermal insulation that suits well with the usage of the building. Metal insulation exhibits low thermal conductivity value.
Single or double skin insulated roof and wall cladding represent a major breakthrough in meeting the demand for a versatile high specification system. The cost efficiency achieved makes it a viable proposition for all users who require higher insulation values in terms of energy efficient roof and walls.
Single Skin insulated System
Single Skin insulated roof and wall construction comprises of roof and wall cladding with metal building roof insulation used underneath the cladding as under-deck insulation. The metal building insulation is rolled over the purlins or girts and the external cladding sheets are then fixed to the secondary framing through insulation. Only the vapour barrier is visible from inside the building.
Double Skin insulated System
Double Skin Insulated roof construction comprised of internal liner panels directly screwed to the secondary framing, sub-girts screwed through spacer blocks & liner sheet to the purlins below, metal building roll-insulation with vapour barrier is laid over the sub-grits and finally the outer panel is screwed to the sub-grits through the insulation. Double skin wall cladding construction comprises of internal liner screwed to the inside face of girts with the external sheet and insulation fixed on the outside of the building.
It provides excellent protection against heat during summer apart from its property of acoustic absorption
|
|
|
|
|